
LiTime Lithium Battery Solutions
The Comprehensive Guide to LiFePO4 Voltage Chart
LiFePO4 battery voltage is closely tied to state of charge (SoC): as the battery charges or discharges, its voltage shifts, and a higher voltage generally indicates more available capacity. Key reference points include nominal voltage for normal operation, a higher resting voltage after a full charge and no-load rest, and defined upper/lower limits to avoid overcharge or deep discharge. The LiFePO4 Voltage Chart stands as an essential resource for comprehending the charging levels and condition of Lithium Iron Phosphate batteries.
12V Lithium Battery Voltage Chart

24V Lithium Battery Voltage Chart

36V Lithium Battery Voltage Chart

48V Lithium Battery Voltage Chart

LIFE & DISCOVERY
USER FOCUSED
We are LiTime
At LiTime, we are shaping a sustainable future with innovative lithium energy solutions. Our mission is clear: Maximize value through tech-driven solutions to achieve easy access to energy freedom. LiTime empowers users to explore new ways of life and discovery, embracing renewable energy for a cleaner, more sustainable world.
Reliable Power You Can Trust
LiTime LiFePO4 Lithium Batteries
Why Buy on LiTime.com
Advantages of Buying from the Official Website
LiTime Debuts Argoseeker A1 & A2 Electric Outboard Motors

LiTime Launches Go Electric Contest Season 2 with Argoseeker and $20,000 in Prizes

LiTime Argoseeker Electric Outboard Motor - Launches First in August 2026

Group 24 vs Group 27 Batteries: What’s the Difference?

Batteries in Parallel vs Series: How to Correctly Connect Your LiFePO4 Batteries

The Comprehensive Guide to LiFePO4 Voltage Chart

LiTime Xtra Mini 100Ah Battery Setup: Tiny Boat Nation’s Mini Pontoon Wet Bar Story

LiTime 48V 100Ah Lithium Golf Cart Battery Review: Joe’s Club Car Story

LiTime 48V 100Ah LiFePO₄ Battery Review: How Philippe & Divine Built an Off-Grid Solar Power System
FAQS
The nominal voltage of a LiFePO4 cell is 3.2V. These cells are considered fully discharged at 2.5V and fully charged at 3.65V. Note that these values may vary based on the specific cell specifications.
Lithium batteries generally have a nominal voltage of approximately 3.7V per cell. When fully charged, a 12V LiFePO4 battery can reach about 13.3V to 13.4V.
A single LiFePO4 cell has a nominal voltage of 3.2V. Its safe operating window is typically between 2.5V (fully discharged) and 3.65V (fully charged). It is critical that the cell voltage does not drop below 2.5V to avoid permanent damage.
The minimum voltage threshold for 12V LiFePO4 batteries is around 10V. Discharging the battery below this voltage can lead to permanent damage. Regularly monitoring the voltage chart is essential for safe charging.
The low voltage cutoff for LiFePO4 batteries is typically set at 2.5V per cell, which is the voltage below which the battery should not discharge to prevent damage.
The bulk/absorb voltage for LiFePO4 batteries usually falls between 14.2V and 14.6V. A voltage of 14.0V may also be acceptable with sufficient absorb time. Slightly higher voltages, around 14.8V to 15.0V, can be used briefly before disconnecting the battery.
While LiFePO4 batteries have a very long life, they will eventually degrade. Here are three common signs that your battery may be failing: ●Reduced Capacity: The battery doesn't hold a charge for as long as it used to. ●Charging Problems: It takes much longer than usual to charge, or it fails to reach a full 100% charge. ●Physical Swelling: The battery case looks puffy or swollen. This indicates an internal failure, and the battery should be safely decommissioned immediately.





























































