Total: $0.00
From Charging to Powering – LiTime Got It All
Batteries, Chargers, Inverters, Accessories, & More
【Compatibility】Multiple Options For Charging 12V Batteries. Fit for 12V Lithium, Gel, AGM, and Calcium batteries and allows the batteries to be charged 100%. Also, it can activate the dead lithium batteries at low voltage.
【Max. 600W Solar Input & 40A Current Output】Equipped with an ACC wire, a solar input terminal, a DC input terminal, and an output terminal to enhance the operational efficiency of the solar, alternator, starting battery, and service battery.
【Intelligent Charging Protection】Overvoltage input protection, output reverse connection protection, battery overvoltage protection, over temperature protection, charging timeout protection, and BMS protection (for LFP battery).
【Easily Operating】Simple and straightforward operation instructions with LED indicator and operation buttons, users only need to choose the suitable battery type for your battery, then let the DC-DC charger do the charging.
【Reverse Charging】When the starting battery voltage is between 3-12V and the living battery voltage is greater than 12.5V, press and hold "REVERSE CHARGE" for 3 seconds to start reverse charging. It is recommended to start the battery when the voltage is greater than 13V and exit reverse charging when the charging current is less than 10A or the voltage of the domestic battery is less than 11V.
Note: Use the included screws (Φ15/64'' [6mm], 15/32'' [12mm]) for secure mounting to prevent installation failure or product damage.
COMPATIBILITY The knob operation conveniently selects battery type for charging with a 60A high-efficiency output, adaptable to larger capacity battery packs. Additionally, a low current port limits output to 30A. The device offers convenient 30A and 60A charging and discharging current options for versatile use.
SMART MULTI-STAGE CHARGING The 12V 60A DC - DC smart charger changes different charge modes to match your battery type. For LiFePO4 Battery it will charge in 2 steps mode (CC, CV), for Lead Acid Battery it will charge by 3-stage charging (Bulk, Absorption, and Float), to make sure it optimally and automatically charges to 100%. It also can wake up your lithium battery after BMS protection.
VARIOUS PROTECTION SAFETY This LITime battery charger with high-quality offers over-voltage protection, low-voltage protection, over-temperature protection, short circuit protection, and output reverse polarity protection to ensure operation safety. It also isolates the input and output to prevent voltage transfer errors and interference with home battery charging.
WIDELY USED The compact and robust design of our dc to dc charger makes it suitable for RVs, commercial vehicles, and many more applications.The output end can not only be connected to a life battery, but also be directly used with a DC load.
Note: Use the included screws (Φ5/32'' [4mm], 5/8'' [16mm]) for secure mounting to prevent installation failure or product damage.
COMPATIBILITY Knob operation makes it convenient to quickly select the type of battery that needs to be charged. The output current of the charger is 40A, with high efficiency and adaptability to larger capacity battery packs; There is a low current port that can limit the output current to 20A. There are two charging and discharging current options, 20A and 40A, which are convenient for use in multiple scenarios.
SMART MULTI-STAGE CHARGING The 12V 40A DC to DC smart charger changes different charge modes to match your battery type. For LiFePO4 Battery it will charge in 2-step mode (CC, CV), for Lead Acid Battery it will charge by 3-stage charging (Bulk, Absorption, and Float). It can optimize the charging efficiency of different types of batteries and extend their service life. It also can wake up your lithium battery after BMS protection.
VARIOUS PROTECTION SAFETY This LiTime battery charger with high-quality offers over-voltage protection, low-voltage protection, over-temperature protection, short circuit protection, and output reverse polarity protection to ensure operation safety. It also isolates the input and output to prevent voltage transfer errors and interference with home battery charging.
WIDELY USED The compact and robust design of LiTime 12V 40A DC to DC charger makes it suitable for RVs, commercial vehicles, and many more applications. The output end can not only be connected to a service battery but also be directly used with a DC load.
Note: Use the included screws (Φ5/32'' [4mm], 5/8'' [16mm]) for secure mounting to prevent installation failure or product damage.
A DC-DC charger converts and regulates power from a vehicle’s alternator to safely charge a secondary battery, ensuring optimal charging for lithium and other battery types.
The LiTime DC-DC battery chargers are compatible with both conventional and smart alternators. However, since conventional alternators provide a steady voltage during charging and smart alternators adjust their output based on operating conditions, it is essential to connect the charger to the smart alternator using the included Signal cable through the Vehicle Ignition Port.
Yes, LiTime DC-DC charger compatible with 12V Lithium, Gel, AGM, and Calcium batteries. This charger enables the batteries to reach a full 100% charge. Additionally, it has the capability to jump start lithium batteries that have become discharged to a low voltage.
Yes. The LiTime DC-DC battery chargers feature high-quality safety measures, including over-voltage protection, low-voltage protection, over-temperature protection, short circuit protection, and output reverse polarity protection to ensure safe operation. It also isolates the input and output to prevent voltage transfer errors and interference during home battery charging.
The charger includes LED indicators to show the charging status.
A DC-DC charger converts DC voltage from one battery bank to another. It’s ideal for charging a 12V battery from a vehicle’s electrical system, whereas an AC charger requires an external AC power source (like a wall outlet).