Total: $0.00
60A Fast Charger For Your 12V Lithium Battery
LiTime 12V LiFePO4 battery charger is a smart AC to DC battery charger. It can charge RV, trolling motor, home storage and off-grid lithium batteries. Mountable design supports to install on the wall of scenarios. Its portable handle helps you remove or carry the charger easily
Safer Connection, Higher Efficiency
LiTime 12V 60A LiFePO4 charger gives you an easier and safer user experience. This smart battery charger upgrades to 120A Anderson connector and M8 terminals, ensuring faster charging efficiency and elevating your charging experience.
5 Safety Protection & Lithium Battery Activation
LiTime 12V lithium battery charger can activate your lithium battery as BMS protection is triggered. Plus, It provides 100% safe and reliable protection, including over-heating, reverse polarity, output short-circuit, output over-current and output over-voltage.
Smart LED Indicators
LiTime 12V battery charger has real-time charging status monitoring. You can view its power on/off, standby, charging, full charge and charging abnormalities status through LED charging indicators.
How to Charge 12V Battery
You need to connect the DC output cable with the battery first, making sure their positive and negative connection isn't reversed. Then connect the Anderson connector. Lastly, plug your AC input into the outlet.
The charger includes LED indicators to show the charging status, which lets you monitor progress and know when the battery is fully charged.
This 12V (14.6V) 60A charger is specifically designed for 12V LiFePO4 lithium batteries. At 60A, a 300Ah 12V LiFePO4 battery can be fully charged in about 5 hours, depending on the initial charge level.
Yes, this charger includes a fan for cooling, which activates during operation to prevent overheating. The noise level is minimal and is typical of high-power chargers.
Yes, it has an automatic shutoff feature. Once the battery reaches full capacity, the charger stops charging and switches to maintenance mode to prevent overcharging.
Although it is generally safe to leave a LiFePO4 battery on the charger, as both the charger and the battery itself have a BMS to prevent overcharging, it’s still best to monitor the charging process.
Once the battery is fully charged, disconnecting it promptly is recommended to avoid unnecessary damage.
For convenience, LiTime offers chargers with Anderson connectors, allowing you to stop charging simply by unplugging the Anderson connector without needing to separate the battery terminals from the screws after charging.
However, for optimal safety, it’s advised to first unplug the AC plug before disconnecting the Anderson connector.
This charger has built-in protections against overcharging, overheating, reverse polarity, and short circuits to ensure safe charging.
Yes, it’s best to use the charger in a well-ventilated area to ensure proper cooling and efficiency.
No. This charger is designed only for LiFePO4 batteries. For charging Lead-Acid, LiFePO4, or NCM batteries, we recommend using our LiTime Multi-Bank Chargers, including 12V+24V 10A, 12V+36V 10A, 12V 10A 2-Bank, 12V 10A 3-Bank, and 12V 10A 4-Bank.
Charger worked great took about one hour to completely charge my 12 V 100ah battery.
Although I didn’t realize it when I purchased it that I did not need this charger because the 3000 W inverter charger I purchased has the same function.
Great charger! Just wish it was water proof and had longer cable.
Charges very quickly
Great working charger would recommend to others.
This charger is great. I'm charging 4 Li time 165 Ah lithium battery's in parallel It charges fast and kicks in the heaters when they are to cold to charge!
Just received my 12V 60A Charger. Installed it in my Ice Castle. Hooked it up to my three 165 Ah lithium batteries in parallel. It works great. I needed the 60-amp charger to start the self-heating to charge my batteries in the cold. It's all working great now! Thanks for all the online help, too!
Like the draw of this unit (925W) for the older outlets/wiring at our 1920s mountain cabin.
I’m not sure if there is an adjustment so it will turn on sooner. My batteries get to about 10% before it will start to charge. I don’t think that will be a problem unless I have a high demand for power in that range.
It runs very cool so heat is not an issue at all. It will charge my 230 amp hour batteries in about 6 hours. All in all I really like it and would by another one if needed.
