The LiTime 12V 100Ah series currently consists of five different products, classic 12V 100Ah, Mini, TM, Smart and Self-heating, which has left many customers pondering the differences between them and how to make the right choice.
In this article, we will delve into these five distinct products, providing a comprehensive comparison to help you navigate your decision-making process.
Table of Content
- A Comprehensive Comparison Among LiTime 12V 100Ah LiFePO4 Batteries
- 1. LiTime 12V 100Ah---Classic Hot Selling
- 2. LiTime 12V 100Ah Mini --- Mini in Size & Light in Weight
- 3. LiTime 12V 100Ah TM ---Special Design for Trolling Motor
- 4. LiTime 12V 100Ah Smart -- Low Temp Charging Cutoff Protection
- 5. LiTime 12V 100Ah Self-Heating -- Heating Pad Built In
- FAQS about LiTime 12V 100Ah Sereis LiFePO4 Battery
A Comprehensive Comparison Among LiTime 12V 100Ah LiFePO4 Batteries
LiTime 12V 100Ah LiFePO4 Battery --- Classic Hot Selling
The LiTime 12V 100Ah LiFePO4 battery, being the most iconic model in this series, has achieved outstanding sales performance with an annual volume exceeding 5000+.
Like other LiTime 12V 100Ah series LiFePO4 battery, this one has the 1280Wh energy, which can support 4S4P (4 in series and 4 in parallel) to build a 48V 400Ah battery system for 20.48kWh energy and max. 20.48kW load power. It's perfect for RV, solar, home energy storage, and off-grid applications.
Features of LiTime 12V 100Ah
General
- Dimensions: L13*W6.77*H8.43 inches (L329*W172*H214 mm)
- Weights: 24.25lbs
- Battery Pack Case: ABS Plastic
- Protection Class: IP65
- Warranty: 5 years
BATTERY
- Cell: Prismatic LiFePO4 Battery
- Nominal/Usable Capability: 100Ah
- Nominal Voltage: 12.8V
- Energy: 1280Wh
- Cycle Life: ≥4000 times
Charge
- Charge Method: CC/CV
- Charge Voltage: 14.4V±0.2V
- Recommend Charge Current: 20A (0.2C)
BMS
- BMS Boar: 100A
- Max. Continuous Charge/Discharge Current: 100A
- Max. Discharge Current 5 Seconds: 280A
- Max. Continuous Load Power: 1280W
- Internal Impedance: ≤40mΩ
Temperature
- Charge Temperature: 32℉ ~ 122℉ (0℃ ~ 50℃)
- Discharge Temperature: -4℉ ~ 140℉ (-20℃ ~ 60℃)
- Storage Temperature: 14℉ ~ 122℉ (-10℃ ~ 50℃)
LiTime 12V 100Ah Mini --- Mini in Size & Light in Weight
Because of its mini size (3/5 size of traditional 12V 100Ah lead acid battery) , lighter weight (only 19 lbs) but higher energy density ( 164.5wh/L (142.2wh/kg), the LiTime 12V 100Ah mini has become one of the most popular LiFePO4 from LiTime. It has also set a record of selling over 6000+ units during the 15-day pre-sale period, receiving high praise from the market. Read on the LiTime 12V 100Ah vs LiTime 12V Mini LiFePO4 battery to know the details.
Features of LiTime 12V 100Ah Mini
Small in Size & Light in Weight
Compared to the typical 12V 100Ah version, mini has 35% smaller in size, 10% ligher in weight (only 19 lbs) but the same capacity.
Internal Structure
LiTime's 12V 100Ah Mini boasts an optimized internal design with a compact and sturdy structure, ensuring rock-solid reliability that has been rigorously tested and confirmed to be the safest ever. With this level of safety, you can confidently install the battery in any direction that suits your application, without worrying about any damage from rough roads or bumpy rides.
Note: Other 12V 100Ah LiFePO4 batteries can only be installed upright with post bolts facing up or on its 2 smaller sides.
Battery Cell
Unlike other batteries, the mini uses pouch LiFePO4 battery cells while others use prismatic LiFePO4 battery cells.
Pouch cells are flexible and lightweight, making them ideal for portable applications such as mobile devices and power banks. They are often used when space and weight are critical factors for the application. Pouch cells are also known for their ability to maintain voltage levels and discharge rates at lower temperatures.
This is one of the reasons why mini can be lighter and samller.
SPECS of LiTime 12V 100Ah Mini
General
- Dimension: L10.24*W5.24*H8.96 inches (L260*W133*H227.5 mm)
- Posts: M8*1.25mm
- Weight: 19 lbs
- Protection Class: IP65
- Warranty: 5 years
CHARGE
- Charge Method: CC/CV
- Charging Voltage: 14.4V±0.2V
- Recommend Charge Current: 20A (0.2C)
BATTERY
- Cell: LiFePO4
- Rated Capability: 100Ah
- Nominal Voltage: 12.8V
- Energy: 1280Wh
- Cycle Life: ≥4000 times (25℃, 0.2C, 100 DOD)
BMS
- BMS Board: 100A
- Max. Continuous Charge/Discharge Current: 100A
- Max. Discharge Current 5 Seconds: 250A
- Max. Continuous Load Power: 1280W
- Internal Impedance: ≤40mΩ
TEMPERATURE
- Charge Temperature: 32℉ ~ 131℉ (0℃ ~ 55℃)
- Discharge Temperature: -4℉ ~ 140℉ (-20℃ ~ 60℃)
- Storage Temperature: 14℉ ~ 122℉ (-10℃ ~ 50℃)
LiTime 12V 100Ah TM ---Special Design for Trolling Motor
The LiTime 12V 100Ah TM (Trolling Motor) version LiFePO4 deep cycle batteries is specially designed for trolling motor.
The TM version has been developed based on the needs of thousands of users in in the marine field The LiTime R&D team of experts utilized cutting-edge technology and advanced materials to develop the battery.
Features of LiTime 12V 100Ah TM
Upgraded BMS for Trolling Motor & Low Temperature Protection
The LiTime 12V 100Ah TM LiFePO4 battery comes with an advanced Battery Management System (BMS) specifically designed to meet the specific requirements of trolling motors. It provides standard protection against over-voltage, under-voltage, overheating, over-current, and short-circuits like other LiTime LiFePO4 batteries.
Additionally, it also boasts newest technology that ensures it stays safe from moisture, dust, and salt spray, allowing the battery to function at its best even in tough conditions.
What’s more, this battery is outfitted with a low-temperature cutoff protection system, allowing for charging to occur when temperatures are above 32℉ (0℃), while charging is disabled when temperatures fall below this threshold. Charging recovery is possible when temperatures rise above 41℉ (5℃).
Built-in 10kW TVS for Better Resistance to Big Waves
The 12V 100Ah TM LiFePO4 battery is equipped with a 10kW TVS for enhanced shock resistance, safeguarding both the battery and motor against instability in turbulent waters. Its reliability makes it a suitable choice for both leisurely boating and big-game fishing, providing the user with unshakable confidence to maximize their experience on the water.
Instantaneous Load Capacity
The 12V 100Ah TM LiFePO4 battery has the ability to discharge at a maximum current of 300A to 500A for 5 seconds, making it a reliable power source for seamless and precise control of your trolling motor. Whether you need to reach your destination quickly or catch fish more efficiently, this battery can handle sudden and heavy loads with ease, giving you complete command of your boat.
SPECS of LiTime 12V 100Ah TM
MODEL | LiTime 12V 100Ah TM LiFePO4 Battery |
---|---|
Cell Type | Prismatic LiFePO4 |
Rated Capacity |
12.8V 100Ah |
Energy | 1280Wh |
Cycle Life | 4000 times (25℃, 0.2C, 100% DOD) |
BMS | 100A |
Internal Resistance | ≤40mΩ |
Charge Method | CC/CV |
Charge Voltage | 14.4V±0.2V |
Recommend Charge Current | 20A (0.2C) |
Max. Continuous Charge/Discharge Current | 100A |
Max. Discharge Current 5 seconds | 300A to 500A |
Max. Continuous Output Power | 1280W |
Protection Class | IP65 |
Protection Type | Short Circuit, Overload, High Temp Charging/Discharging, Low Temp Charging/Discharging, Over Voltage, Under Voltage |
Housing Material | ABS (Flame Retardant Plastic) |
Operation Temperature | Charge: 0~55 ℃/32~131℉ Discharge: -20~60 ℃/-4~140℉ Storage: -10~50 ℃/14~122℉ |
Low-Temperature Charging Protection | 32℉/0℃ |
Low-Temperature Charging Recovery | 41℉/5℃ |
Dimension | L329*W172*H214 mm; L13*W6.77*H8.43 in |
Weight Approx. | 10.05 kg/22 lbs |
LiTime 12V 100Ah Smart -- Low Temp Charging Cutoff Protection
Besides the TM version, LiTime 12V 100Ah Smart LiFePO4 Battery also has low-temp protection.
It has a built-in smart BMS that is equipped with OTCB ( one touch control button) technology. Easy to use one-touch button can turn the battery ON/OFF, wake from sleep mode, and activate the force charging mode under low-temp protection. Read your battery status with the simple indicator light: low power, sleep mode, BMS protection, and provide full life-cycle management.
Note: Because there's a button built-in, the protection class of the battery is relatively lower than others.
Features of LiTime 12V 100Ah Smart OTCB
Upgrade BMS with Low Temperature Protection
The built-in 100A smart BMS provides six protections for your battery: overcharging, over-discharging, over-current, short circuit, over-temperature, and under-temperature.
Smart LiFePO4 Battery that Supports Both Series & Parallel Connections
OTCB'S intelligent BMS system differs from the traditional version BMS by adding the following functions. It's one of the few smart batteries on the market that supports both series and parallels connections.
OTCB Tech & User-Friendly Indicator
LiTime 12V 100Ah Smart LiFePO4 Battery has a built-in smart BMS that is equipped with OTCB technology. Easy to use one-touch button can turn the battery ON/OFF, wake from sleep mode, and activate the force charging mode under low-temp protection. Read your battery status with the simple indicator light: low power, sleep mode, BMS protection, and provide full life-cycle management.
Portable & Lightweight
The light weight of 24.85 lbs with compact sizes of L10.79*W8.13*H8.07 inches. With a detachable strap handle design, it is ready to power any of your applications.
Specs of LiTime 12V 100Ah Smart
GENERAL
- Dimension: L10.79*W8.13*H8.07 inches (L274*W206.5*H205 mm)
- Posts: Titanium
- Weight: 24.91 bls (11.3kg)
- Warranty: 5 years
BATTERY
- Cell: Prismatic LiFePO4 Battery
- Nominal/Usable Capability: 100Ah
- Nominal Voltage: 12.8V
- Energy: 1280Wh
- Cycle Life: ≥4000 times
BMS
- BMS Board: 100A
- Max. Continuous Charge/Discharge Current: 100A
- Max. Discharge Current 5 Seconds: 300A to 500A
- Max. Continuous Load Power: 1280W
- Internal Impedance: ≤40mΩ
TEMPERATURE
- Charge Temperature: 32℉ ~ 131℉ (0℃ ~ 55℃)
- Discharge Temperature: -4℉ ~ 140℉ (-20℃ ~ 60℃)
- Storage Temperature: 14℉ ~ 122℉ (-10℃ ~ 50℃)
- Low-Temperature Charging Protection: 32℉ (0℃)
- Low-Temperature Charge Protection Recovery: 41℉ (5℃)
- Low-Temperature Force Charging: Yes. See manuals for operations.
CHARGE
- Charge Method: CC/CV
- Charge Voltage: 14.4V±0.2V
- Recommend Charge Current: 20A (0.2C)
LiTime 12V 100Ah Self Heating -- Heating Pad Built In
The LiTime 12V 100Ah self-heating version has the automatic self-heating function that will be activated by the BMS when the battery is connected to charger @-20℃ to 5℃ / -4℉ to 41℉. The heating will be stopped when the battery temperature has reached 10℃ / 50℉, which normally takes approx. 90 mins from -10℃ to 10℃ /14℉ to 50℉ and approx. 150 mins from -20℃ to 10℃ / -4℉ to 50℉.
The battery has 2 heating pads installed on two sides, providing sufficient heating and more comprehensive protection of your battery.
Features of LiTime 12V 100Ah Self-Heating
Automatic Self-Heating Function
LiTime smart self-heating function will be automatically activated once the charging temperature drops below 41°F (5°C). The heating will be stopped when the temperature has reached 50°F (10°C), and then the battery will be normally charged. This revolutionary self-heating technology allows you to charge your batteries in cold environments effortlessly. Keep you away from the worries of traditional LiFePO4 batteries while charging at a low temperature.
Can be Charged At Lowest -4°F
LiTime 12V100Ah Self-Heating Lithium Battery with its 100 Amp BMS provides enough energy to run the devices and it's equipped with state-of-the-art Automotive Grade LiFePO4 battery cells. Also, it takes an intelligent BMS suitable for the low-temperature regions instead of normal BMS, which enables the battery to be charged at the lowest -4 °F(-20 °C to 0 °C/ -4 °F to 122 °F), widely used for RV, cabin, off-grid or marine in cold winters, and protects the battery from over temperature, over current, overcharge, over-discharge, short circuit.
Specs of LiTime 12V100Ah Self-Heating LiFePO4 Battery
GENERAL
- Dimensions: L13*W6.77*H8.43 inches (L329*W172*H214 mm)
- Battery Pack Case: ABS Plastic
- Protection Class: IP65
- Warranty: 5 years
CHARGE
- Charge Method: CC/CV
- Charge Voltage: 14.4V±0.2V
- Recommend Charge Current: 20A (0.2C)
- Required Minimum Charge Current: ≥10A
BATTERY
- Cell: Prismatic LiFePO4 Battery
- Nominal/Usable Capability: 100Ah
- Nominal Voltage: 12.8V
- Energy: 1280Wh
- Cycle Life: ≥4000 times
BMS
- BMS Board: 100A
- Max. Continuous Charge/Discharge Current: 100A
- Max. Discharge Current 5 Seconds: 280A
- Max. Continuous Load Power: 1280W
- Internal Impedance: ≤40mΩ
TEMPERATURE
- Charge Temperature: -4℉ ~ 122℉ (-20℃ ~ 50℃)
- Discharge Temperature: -4℉ ~ 140℉ (-20℃ ~ 60℃)
- Storage Temperature: 14℉ ~ 122℉ (-10℃ ~ 50℃)
- Heating Temperature (Charge): -4℉ ~ 50℉ (-20℃ ~ 10℃)
- Approx. Heating Time: 90 mins (14℉ ~ 50℉/-10℃ ~ 10℃); 150 mins (-4℉ ~ 50℉/-20℃ ~ 10℃)
FAQS about LiTime 12V 100Ah Sereis LiFePO4 Battery
1. Can I connect classic 12V 100Ah and mini in series or parallel?
No. Connecting these two batteries together would be detrimental to their individual lifespans, as they possess differing cells and internal structures.
2. Can these batteries be used as starting batteries for golf carts?
No. All of LiTime 12V 100Ah series are deep-cycle batteries currently. Deep-cycle batteries are designed to provide a steady amount of power over a long period of time, whereas starting batteries are designed to provide a burst of power over a short period of time.
Using a deep-cycle battery as a starting battery could potentially cause damage to the battery and decrease its overall lifespan.
3. Can I charge them with a lead-acid battery charger?
Not recommended. It may not be fully charged when using the lead-acid battery charger. And we do not recommend long-term use, it will affect the performance and life of lithium iron phosphate batteries.
Read on the 3 reliable ways to charge your LiFePO4 battery.
Conclusion
In conclusion, the LiTime 12V 100Ah series have the similarity in some gerneal aspects, such as the nominal voltage, energy, cycle life, internal resistence etc. Different batteries have its own features.
LiTime is a trustworthy brand that provides high-quality grad-A cell LiFePO4 batteries. All of LiTime's LiFePO4 batteries have the life cycles up to 4000+ which means they have more than 10 year's lifespan.
What's more, all the LiFePO4 batteries are built-in BMS (batttery management system) to protect the battery and guard your safety.
With 5 year warranty, if you have any questions about your battery, you can contact service@litime.com to ask for help, we'll always there ready to assist.