Total: $0.00
From Charging to Powering – LiTime Got It All
Batteries, Chargers, Inverters, Accessories, & More
【For 8-120V Battery】Suitable for 8-120V, 0-9999AH battery bank. Auto-recognition for various battery types, including Li-ion, LiFePO4, Gel, AGM, and more.
【Precise Data】The display includes battery voltage/current/power/capacity, remaining charge/discharge time, charge/discharge indicator, and capacity percent. It has a backlight for easy use at night.
【Easy to Install】The shunt can be stably placed or mounted on a flat surface by the shunt holder. The monitor display is simple to install as it's fixed by tabs. (The manual provides very detailed installation instructions)
【Buzzer Alarm】If the voltage or capacity falls below the set value, the LCD display will flash and the buzzer will sound an alarm every 10 seconds.
【Package Include】LCD Monitor Screen*1, 500A Shunt*1, Shunt Holder*1, 20ft Shielded Wire*1, 20AWG 3ft (1M) Power Wire*1,Screwdriver*1, Mounting Screws*3, Manual*1
【99% Tracking Technology】LiTime 30A MPPT Solar Charge Controller with advanced Maximum Power Point Tracking technology can continuously track array’s maximum power point so as to get the maximum amount of power to charge the battery. The tracking efficiency is not less than 99% and peak conversion efficiency is up to 98%.
【Bluetooth Function】 LiTime 12V/24V MPPT Controller equipped with a built-in Bluetooth module, customers do not need to purchase another Bluetooth module, which can achieve remote control and display usage information. Visit LiTime App download page for more details on downloading the app.
【LCD Screen & LED Indicators】LiTime MPPT controller comes equipped with an LCD screen to display the system operation information and 4 buttons to operate in the menus. Plus, multiple LED indicators will help to indicate the state of the solar panel array, battery, loads, controller.
【Excellent Heat Dissipation & Multiple Protections】LiTime MPPT controller is made of die-cast aluminum, which ensures excellent heat dissipation to reduce the power loss. In addition, the multiple protections built in the solar charge controller can ensure that the controller is completely protected from Reverse Connection, Overpower, Overvoltage, Short-circuit, and Over-temperature.
【Applicable to LiFePO4, Lead-acid Battery】LiTime 12V/24V 30A MPPT Solar Charge Controller’s default setting is for 12V LiFePO4 battery. But it’s also compatible for 24V LiFePO4 battery, Sealed, Gel Lead-acid batteries by adjusting the parameter.
【Additional Components】The copper wire connector equipped in the accessory can increase the contact area between the wire and MPPT during installation, increasing the ability to transmit current.
【Advanced 99% Tracking Technology】LiTime's 60A MPPT Solar Charge Controller features advanced Maximum Power Point Tracking technology that continuously tracks the array's maximum power point, ensuring maximum power is utilized to charge the battery. The tracking efficiency is no less than 99%, and the peak conversion efficiency is up to 97%.
【Bluetooth Function】The LiTime 12V/24V/36V/48V MPPT Controller equipped with a built-in Bluetooth module, customers do not need to purchase another Bluetooth module, which can achieve remote control and display usage information. Visit LiTime App Download page for bluetooth using.
【LCD Screen & LED Indicators】The LiTime MPPT controller is equipped with an LCD screen that displays system operation information and 4 buttons to navigate the menus. Multiple LED indicators display the status of the solar panel array, battery, loads, and controller.
【Excellent Heat Dissipation & Multiple Protections】Constructed with die-cast aluminum, the LiTime MPPT controller provides excellent heat dissipation to reduce power loss. Additionally, multiple protections are built-in to ensure the controller is fully protected from Reverse Connection, Overpower, Overvoltage, Short-circuit, and Over-temperature.
【Compatible with Multiple Batteries】The LiTime MPPT controller is compatible with Sealed, Gel, and Lead-Acid batteries by adjusting the parameters. It also features LiFePO4 Battery Charging Mode, making it easy to charge LiFePO4 batteries.
【Additional Components】The copper wire connector equipped in the accessory can increase the contact area between the wire and MPPT during installation, increasing the ability to transmit current.
【Compatibility】Multiple Options For Charging 12V Batteries. Fit for 12V Lithium, Gel, AGM, and Calcium batteries and allows the batteries to be charged 100%. Also, it can activate the dead lithium batteries at low voltage.
【Max. 600W Solar Input & 40A Current Output】Equipped with an ACC wire, a solar input terminal, a DC input terminal, and an output terminal to enhance the operational efficiency of the solar, alternator, starting battery, and service battery.
【Intelligent Charging Protection】Overvoltage input protection, output reverse connection protection, battery overvoltage protection, over temperature protection, charging timeout protection, and BMS protection (for LFP battery).
【Easily Operating】Simple and straightforward operation instructions with LED indicator and operation buttons, users only need to choose the suitable battery type for your battery, then let the DC-DC charger do the charging.
【Reverse Charging】When the starting battery voltage is between 3-12V and the living battery voltage is greater than 12.5V, press and hold "REVERSE CHARGE" for 3 seconds to start reverse charging. It is recommended to start the battery when the voltage is greater than 13V and exit reverse charging when the charging current is less than 10A or the voltage of the domestic battery is less than 11V.
Note: Use the included screws (Φ15/64'' [6mm], 15/32'' [12mm]) for secure mounting to prevent installation failure or product damage.
【Safety and reliability】 The 250A Switchable Circuit Breaker can effectively protect the LiFePO4 battery and circuit from overloading, short circuits, and other electrical faults, ensuring safety and reliability during use.
【High-quality materials】 The product is made of high-quality materials with excellent durability and oxidation resistance, which can meet the long-term use requirements.
【Easy to use】 The 250A Switchable Circuit Breaker is easy to install and operate without professional skills, allowing users to get started quickly.
【Wide applicability】 The product is suitable for various LiFePO4 batteries and can be widely used in automobiles, ships, solar panels, and other fields to meet the needs of different users.
【Energy-saving and environmentally friendly】 LiFePO4 batteries have the characteristics of efficient energy-saving and environmental protection. When used in conjunction with the 250A Switchable Circuit Breaker, their advantages in energy-saving and environmental protection can be fully realized.
【Specifications】Heavy Duty ABS plastic housing and tinned copper inner stud, durable and made for safe use, equipped with 4 bolts. Removable windows can be adjusted as needed. Rating: 275A DC Continuous, 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec), Stud Size: 2x3/8" (10mm).
【Widely Application】This battery shut-off switch is suitable for DC 12 - 48V system to secure the electrical system. It is widely used for Cars, Marine, Boats, RVs, Campers, Travel Trailers, Trucks, ATVs, UTVs, Battery banks, and other electrical equipment switches.
【Compatibility and Safety】 This battery switch is suitable for 12V/ 24V/ 36V/ 48V systems, used for the protection of electrical systems; When the battery is not in use, avoid unnecessary battery consumption and safely disconnect the battery; Providing a convenient and reliable way to turn off the power and protect the battery from excessive consumption.
【Easy to Operate】2 positions on/off, for use in 12-48V DC systems. Rated value: 275A DC continuous, 455A DC intermittent (5 minutes), 1250A DC start (10 seconds).4 detachable baffles are suitable for wiring needs in different scenarios.
【Packaging Includes】Battery switch * 1, Mounting Screws * 4, Installation Guide Sticker*1, provide great convenience for your installation.
【For High Power Needs】 Designed for high-power equipment and circuits, with a maximum operating voltage of DC 48V and a continuous current of 300A.
【High-quality Build】 Constructed with high-quality copper for stable, long-lasting performance with excellent conductivity and durability.
【Easy to install】 Features a user-friendly screw fixing method for fast and easy installation and disassembly.
【Multi-functional application】Compatible with LiFePO4 batteries on the market, also a versatile solution for automotive, marine, solar panel applications, and more.