Total: $0.00
For a complete charge of a 12V LiFePO4 battery, a charger with a voltage ranging of 14.4V±0.2V is necessary. If a charger with a lower voltage is used, it can still charge the battery, but it won't reach full 100% capacity.
Trickle charging is not acceptable for lithium batteries. Charging a LiFePO4 battery with a trickle charger not designed for this type of battery could lead to overcharging or damage due to the different charging requirements of lithium batteries compared to traditional lead-acid batteries.
Yes, you can. But charging a battery to less than 100% and avoiding complete discharge always increases cell longevity. Similarly, maintaining operation within the 20%-80% state of charge (SoC) range will prolong the life of lithium batteries. In the case of LiTime deep cycle lithium batteries, they can withstand over 4000 deep cycles at 100% Depth of Discharge (DoD), over 6000 cycles at 80% DoD, and more than 15,000 cycles at 60% DoD.
Leaving a lithium-ion battery on the charger overnight can be generally safe if you are using a charger like LiTime lithium battery chargers which is designed to stop charging once the battery reaches full capacity. Most modern lithium-ion chargers are designed with this feature to prevent overcharging.
It is not recommended to fully discharge LiFePO4 batteries. Although these batteries can handle deep discharges better than lead-acid batteries, frequently discharging them to 0% can reduce their lifespan and performance. It's best to recharge the battery before it drops below a very low level, ideally at 20% or higher.
No. This charger is designed only for LiFePO4 batteries. For charging Lead-Acid, LiFePO4, or NCM batteries, we recommend using our LiTime Multi-Bank Chargers, including 12V+24V 10A, 12V+36V 10A, 12V 10A 2-Bank, 12V 10A 3-Bank, and 12V 10A 4-Bank.
This charger is like a fire hose pouring power into my batteries. I have 3- 230 AH LiTime batteries, so it takes a minute to charge them back up with the OEM 55 amp charger. Install was quite easy. One thing the instructions should mention is to put the negative wire to the output side of your shunt so you can see how much charge is happening.
I picked up a couple of large, 300 amp hour batteries and needed a decent charger. My choice was the Li Time 80 amp charger and it took 10 minutes from the bix to install and operation. This is a great addition to my off grid system! Works like a charm!
great product
I spent a good deal of money on two Epoch 300 amp Lithium Ion batteries for my Class B RV and ran down the batteries too low. No RV charging would work. Getting this 80 amp battery charger will help in such times of need and it is fast! Takes about 6 hours for both and will be a great safety net on the road.
Works great, Charged my batteries quick and to full charge in a few hours! I'm very pleased!
Great lithium phosphate charger
Needs to be placed away from living space because it makes a ridiculous amount of noise
Works as it should. Doesn't take long to charge my 400ah battery to 100%. I'm happy with it.
